Climbing Technology - RollNLock pulley ascender

Climbing Technology - ROLLNLOCK

Ultra-light multipurpose device for mountaineering, rope work, rescue and self-rescue. Compact and easy to handle, it can be used in three different modes: ascender, pulley or recovery pulley.

Main features:

• the new geometry and the different color of the cheeks make its use even more intuitive;
• allows the ascent of a rope in compliance with EN 567 / EN 12841-B standards (ascender mode);
• thanks to the possibility of locking the cam, it can be used as a simple pulley for lifting or transferring a load in compliance with the EN 12278 standard (pulley mode);
• allows the direct recovery of a load, the creation of hoists and the lifting or self-lifting of a person, for example in the event of a fall into a crevasse (recovery pulley mode);
• in pulley mode the rope is free to slide in both directions, while in recovery pulley mode it is free to slide in one direction and locks in the opposite one;
• switching from one mode to another is intuitive and can also be done using gloves or in adverse conditions;
• the compact size and light weight make it an ideal tool to always keep hanging from the harness just in case.

Attention! This product is not a fall arrest device (EN 353-2 / EN 12841-A) nor can it be used for self-belaying when climbing.

Characteristics

• Weight: 85gr
• Rope diameter: EN 567:2013 8 ÷ 13 mm, EN 12841:2006-B 10 ÷ 13 mm, EN 12278:2007 ≤ 13 mm